Podręcznik pracy w sieci Frigidaire 200 Series

Subskrybuj nasze sieci społecznościowe, aby być na bieżąco z najnowszymi aktualizacjami!

Komentarz

Excellent repair,showing patience and perseverance and know how !

Awesome video. Fit my situation perfectly . Your logic and explanations for why you were doing what you were doing were appreciated.

Awesome model Frank. I really like the way these EPSONS are built. By pure luck, I own 3 of these beasts now. Opened the first to clean after 500 hours there was no dust inside! Filters do excellent job. Thanks for sharing Frank and always remember......... WE DISSASEMBLE THEM KEYBOARDZZZ!!!!!!!

In cases of a partially worn fans to make life easy I fit a piece of aluminium heatsink onto the back of the lamp, using oven door hi temperature glue and that helps the cooling fan with faster dissipation of the heat. It works 9 out of 10 times though not always. Try it if it doesn't work simply replace the fan. Another detailed instructional video. Great stuff. Generally I hate working on epson projectors especially ultra short throw ones. They are the worst. Epson don't offer service manuals and often no spares available.

Your video is the only one I can find that shows anywhere close to what I need. I have an 8350 that has a lot of dust in the light path and although your video is awesome, it scares the hell out of me to pull it apart now. Also my iris has been getting noisier as time goes on too.

Hello Frank great video I used a multi meter to diagnose my issue as you instructed as I also have a red light heat issue however I’m only getting half of the voltage on all four fans. I have the same unit as you pictured and I’m wondering if there’s some thing wrong in the power supply that you know of as when I stop a fan like you did or maybe another video it shuts the fan bulb off into the default and then I get the full voltage and the fans actually speed up so I’m wondering if you know if there’s a circuit prior to the fans getting the power as I said when the projector bulb is on I’m only getting six point something volts on all four fans and I don’t know if that’s normal as in what should the fan volts be under normal running / operating conditions. Oh any one more thing which may be important I did not get an Epson exact replacement I understand that you suggested that however I did not purchase an exact so I’m wondering if the bulb could be pulling more voltage that is drawing from the fans and this overheating thank you for your help much appreciated. Rob In NJ

Thank you Frank for such a great detailed and thorough video and your explanation of every step!

Hello Frank. Amazing video thank you for sharing! I have this projector and the same error. Where would I be able to buy replacement fans if I were to attempt to follow your Amazing helpful video?

Greetings Frank and thank you for this great video. Could you share some advice on the focus ring? Mine is stuck really tight and can’t seem to move, I hesitate on forcing it. Any advice is greatly welcome!

Thanks, Frank for the opening of the Projector. I have the 8350 and getting an Auto Iris Error. I will need to take apart the lens area. Any advice would be good.

I have a 8350 that powers on and will sometimes power off with both red lights flashing. The bulb powers up and you hear the iris working. Before shutting off you hear a similar sound. Could this also be fan related? Do you clean any of the glass etc? Will probably open mine up in the near future. Thanks for helpful video so far!

I recently bought a 5050ub and still have the Optoma UHZ65 both nice projectors but I do like the DLP image better. The Epson just gives a more film like image with better blacks. The DLPs are way sharper.

Hello Frank

Hello Frank. Hoping you can give some guidance. My 8100 has set for over a year. I decided to watch a movie with it the other day and the picture wont stay on. It comes on for 2 seconds and then off for 2 seconds. Just keeps doing this. Same with the epson logo when I first turn it on. Any advice? The fact that it worked fine the last time I used it and the long time it has set idle makes me guess dust or something but I thought I would ask your opinion. Thanks in advance.

Would you be able to repair my Eason HC6100 for both lights blinking red or have suggestions. I suspect the fan too. Optics work at power up and I have a new lamp.

Hi Frank, big fan of your channel. I was trying to modify my EPSON TW5400's exhausting fan. The fan is CE-6035R-01 CD12V 170mA, which has 4 pins(RBYW). Could you help me with the definition of the pins. Was it Power, Ground, Sensor, Control, just like the computer fans. Many Thanks.

Thanks for the response.. so here is what I know….went to turn on projector one day and nothing, just a lamp light red…so I changed the bulb with one we had in the cabinet was not sure if it was good or bad or who made it …and that one did not seem to work either - maybe it was a old one. Then ordered a new one and put that in off Amazon not a true Epson…that one did work and seemed to be a lot brighter but had a sort of heat smell. Like smelled hot or something or like just a new bulb. Then with that bulb in jt we got a temp light( over heated) and turned off…I did have two other thoughts…maybe I was running all these years on the eco setting which would be less bright thus less heat… and/ or maybe I always had it on a high altitude setting thus fans blowing more… really have no idea…I can will order the exact epson replacement unless you can think of another idea or anything else I could possibly check.. truly appreciate your help and guidance

Have a Epson 5040ub that appears very dim. Even with a brand new bulb. Any thoughts? I’m getting the feeling it’s not powering up the bulb correctly

I have two of these 8100s that failed the same way. There is distortion/smudging of the colors only on the center of the image. Can this be repaired? Thanks!

I have an Epson 8350 and the screen just started flickering. Is this a sign a need a new bulb? I bought this used off craigslist and was told there was a new bulb in here, but I have no idea how to tell. If you have any ideas it would be much appreciated.

.

Zostaw komentarz

#0